Stairs require special attention to detail to ensure they are clean and safe. If carpeted, a regular sweep with a stiff brush and dustpan helps keep debris in one place and out of the way without trampling it back into the carpet. 침대매트리스청소
If stone stairs are stained, a solution of water and oxygenated bleach can be used to help them shine. It’s important to let the cleaning solution dry thoroughly before allowing people to walk on them.
Start from the Top
Starting from the top will prevent you from dragging dirt and debris down onto recently cleaned steps. Additionally, working from the bottom up will allow you to vacuum and wipe down each stair as you go.
Begin by vacuuming your stairs using the slimmest attachment, such as a crevice tool or a power head. This will ensure that every nook and cranny is effectively cleaned. When cleaning carpeted stairs, be sure to adjust your vacuum cleaner’s nozzle or attachment to reach the risers (steps that connect each stair).
Wood staircases should be treated with a mild soap and water solution. Choose a product that is safe for the type of finish used on your stairs.
Shampooing the stairs by hand is the best way to remove heavy stains, but it can be time-consuming and requires a lot of effort. A commercial carpet shampooer with a hose attachment is also effective, but it can be expensive and difficult to maneuver up the stairs. After shampooing, be sure to remove excess water with a wet/dry vacuum or towel. Let the staircases dry completely before vacuuming again.
Take Your Vacuum Up
Vacuuming stairs can be tricky because a standard vacuum cleaner has a cord that can pose a tripping hazard and maneuvering the machine can be difficult. You can avoid these hazards by using a smaller handheld machine with a brush attachment that allows you to reach tight spots and corners.
If you have carpeted stairs, a simple solution of water and mild detergent can remove dirt effectively. Simply mix the solution in a bucket and dip your cleaning brush into it. Start at the top of the staircase and work your way down, being sure to scrub all areas of each step. Be careful not to oversaturate the carpeting or it may be difficult to dry.
When you’re done, use a wet/dry vacuum or an absorbent cloth to remove excess moisture from the steps. This will prevent mold and other contaminants from forming in the damp environment.
Use a Broom
A broom is the best way to remove dirt from carpeted stairs, especially if your vacuum cleaner has difficult-to-reach attachments for the corners and crevices of your staircase. It’s also easier to maneuver than a full-sized vacuum cleaner, which can be cumbersome and pose a tripping hazard.
Wooden steps can be wiped down with a broom, but it’s important to focus on the corners and edges. Dirt may be pushed into these areas, which can then get wet and moldy over time. A stiff-bristled broom works best, but a toothbrush can be used to reach hard-to-reach spots.
For a deeper clean, you can use a mop or steam cleaner on your carpeted stairs. Start at the top landing and work your way down, making sure to thoroughly clean each step. For best results, use a cleaning solution made for your specific type of flooring. Otherwise, the wood could swell or twist, iStairs says. For example, you can mix equal parts of water and white vinegar or lemon juice to create a natural cleaning solution that’s safe for hardwood floors.
Wipe Down the Stairs
Whether they’re carpeted or hardwood, stairs can collect a lot of grime. It’s important to regularly sweep and vacuum them. If you have hardwood stairs, it’s also a good idea to scrub them occasionally. Vacuuming helps remove loose dirt, dust, and pet hair. It’s also a good idea to use a brush attachment to get into nooks and crannies and around the railings.
If you have carpeted stairs, a regular vacuuming is usually enough. If they look particularly dirty, try using a carpet shampoo. Start at the top and work your way down, being sure to vacuum corners and edges.
If you have hardwood stairs, Cohoon recommends combining water and white vinegar or lemon juice in a spray bottle and lightly misting the steps. It’s important not to over-saturate the stairs as too much water can cause water damage and create a slippery surface. Be sure to rinse the cleaning solution off the stairs before letting them dry completely. Also, be sure to switch out your cleaning cloths frequently to avoid contaminating the clean ones with dirty ones.
Clean the Railings and Balusters
When cleaning the stairs, don’t forget to dust or wipe down your railings and balusters. This helps to rid the touchpoint of germs and ensure that you’re not re-infecting people as they climb the staircase. Use a lint-free cloth to wipe down the surface. This is especially important if you have metal railings. This type of metal tends to attract a lot of dust, which can then blow into your home and stick to surfaces like your TV remote or your door handle.
Combine a wood-specific liquid soap (or white vinegar) with warm water in a bucket; dip your cloth and wring it out until it’s damp. Begin at the top of the stairs and work your way down, making sure to hit all corners and edges. Once you’re done, be sure to dry the railings and balusters with a clean lint-free cloth. This will help to prevent moisture from penetrating the metal and causing rust over time. Then, apply a coat of wax to the surface to protect it from further damage and prevent future stains.